PL: DIY Cold Laminator

$0.00

The DIY Cold laminator allows you to mask, transfer and work with papers and laminates. The project is completely DIY with rollers made with a cup turner and polymer resins. If you work a lot with vinyl or laser cutters this is a must have for your shop.

This model is NC-ND-AI [Read Model License Terms]

Add To Cart

The DIY Cold laminator allows you to mask, transfer and work with papers and laminates. The project is completely DIY with rollers made with a cup turner and polymer resins. If you work a lot with vinyl or laser cutters this is a must have for your shop.

This model is NC-ND-AI [Read Model License Terms]

The DIY Cold laminator allows you to mask, transfer and work with papers and laminates. The project is completely DIY with rollers made with a cup turner and polymer resins. If you work a lot with vinyl or laser cutters this is a must have for your shop.

This model is NC-ND-AI [Read Model License Terms]

Printing Tips

Project Wiki: https://wiki.makersmashup.com/en/maker-projects/cold-laminator

See the project in action https://youtu.be/UfSaZ_dAfy4

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or consider supporting my ongoing work https://www.patreon.com/makersmashup Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!

No cost option to support my work?

  • Subscribe to the YT channel

  • Follow me on Thangs.com

  • Watch videos on the channel!

  • Share any of the videos on social media!

  • Share my models with friends and family!

PL: ElectroCookie Enclosure for WLED Projects
$0.00
PL: $10 Wireless IP Webcam for Octoprint (Uses ESP32-CAM)
$0.00
PL: Neopixel Light Bar for 2020 extrusion
$0.00
PL: Endoscope Mount for Ender 3, CR-10
$0.00
PL: LayerFused C201 3D Printer
$0.00