PL: Endoscope Mount for Ender 3, CR-10
I was amazed how few endoscope mounts were out there and how few were really good. Endoscopes will help you identify layer issues, print failures and are just plain fun to watch. Please checkout my YouTube video on this Endoscope mount and please subscribe if you enjoy things like this.
This is an endoscope mount for the Ender 3 and similar Creality printers that have the same front fan shroud. This mount does not interfere with the fan and allows air flow through. It mounts to the front which is generally unused space on the Ender 3.
This model is NC-ND-AI [Read Model License Terms]
I was amazed how few endoscope mounts were out there and how few were really good. Endoscopes will help you identify layer issues, print failures and are just plain fun to watch. Please checkout my YouTube video on this Endoscope mount and please subscribe if you enjoy things like this.
This is an endoscope mount for the Ender 3 and similar Creality printers that have the same front fan shroud. This mount does not interfere with the fan and allows air flow through. It mounts to the front which is generally unused space on the Ender 3.
This model is NC-ND-AI [Read Model License Terms]
I was amazed how few endoscope mounts were out there and how few were really good. Endoscopes will help you identify layer issues, print failures and are just plain fun to watch. Please checkout my YouTube video on this Endoscope mount and please subscribe if you enjoy things like this.
This is an endoscope mount for the Ender 3 and similar Creality printers that have the same front fan shroud. This mount does not interfere with the fan and allows air flow through. It mounts to the front which is generally unused space on the Ender 3.
This model is NC-ND-AI [Read Model License Terms]
Printing Tips
This will print without supports. Just lay it on its side just like the photo. Once you have it printed you will need 1 M3*12 screw as the stock screw you may find is a little short. You should have this spare screw in with your ender spares.
Simply remove the single fan screw, install this mount and attach the endoscope to the mount. It is designed to get tighter as it goes further in so it should support multiple types of endoscopes. They vary widely on amazon. I have tried a few and any that have a 9mm or smaller camera should fit with this mount. I have listed a few versions below. If you check out the video I show you how to hook it up to OctoPrint but you can also use your phone directly or with WiFi.
Cheap one that gets the job done (tested myself): https://www.amazon.com/gp/product/B07DBX527F/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=ebef2c75523966eed91c50c450015ab1&language=en_US Version I personally use: https://www.amazon.com/gp/product/B07DBX527F/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=ebef2c75523966eed91c50c450015ab1&language=en_US WiFi Camera with much better quality: https://www.amazon.com/gp/product/B07DBX527F/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=ebef2c75523966eed91c50c450015ab1&language=en_US
Again I think just about any endoscopic camera less than 9mm will work.
The rc.local.txt file is for Octoprint installs, see the youtube video for details.
Need more help building this? Want to discuss it? Want a custom mount for your setup? I can be found on my public discord chat server. Glad to answer any questions you have.
Please post your makes and let me know if you'd like me to make more models like this.
Suggestions?
If you have suggestions for me to build please message me. I'm always looking to build something exciting and new. You can message me here on Thingiverse or contact me through My Blog or my Youtube Channel
When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.
Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!
Consider dropping a tip https://koji.to/k/8E9J or consider supporting my ongoing work https://www.patreon.com/makersmashup Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!
No cost option to support my work?
Subscribe to the YT channel
Follow me on Thangs.com
Watch videos on the channel!
Share any of the videos on social media!
Share my models with friends and family!