CL: Pipe Dream - Decorative Bowl - Large Format (Can be scaled)
Pipe Dream is a decorative bowl that radiates pipes from its bottom upward. This bowl can be scaled to any size and as shown is scaled to 400mm wide.
This is a decorative bowl that can be scaled up to just about any size. Shown here, scaled to 400mm and printed on the Anycubic Kobra 2 with a .8 nozzle and a .2 layer height. Printed in only 14 hours. The amazing wood grain look is owed to Amolen's wood filament https://amzn.to/48NZexn. The only modifications in the photo were to sand down the inside to remove imperfections and apply some feed-n-wax to the top. NO PAINTING or colors were added. That is the natural filament look. The entire piece shown here used approximately 800g of filament.
This model, when purchased comes with commercial usage rights.
Pipe Dream is a decorative bowl that radiates pipes from its bottom upward. This bowl can be scaled to any size and as shown is scaled to 400mm wide.
This is a decorative bowl that can be scaled up to just about any size. Shown here, scaled to 400mm and printed on the Anycubic Kobra 2 with a .8 nozzle and a .2 layer height. Printed in only 14 hours. The amazing wood grain look is owed to Amolen's wood filament https://amzn.to/48NZexn. The only modifications in the photo were to sand down the inside to remove imperfections and apply some feed-n-wax to the top. NO PAINTING or colors were added. That is the natural filament look. The entire piece shown here used approximately 800g of filament.
This model, when purchased comes with commercial usage rights.
Pipe Dream is a decorative bowl that radiates pipes from its bottom upward. This bowl can be scaled to any size and as shown is scaled to 400mm wide.
This is a decorative bowl that can be scaled up to just about any size. Shown here, scaled to 400mm and printed on the Anycubic Kobra 2 with a .8 nozzle and a .2 layer height. Printed in only 14 hours. The amazing wood grain look is owed to Amolen's wood filament https://amzn.to/48NZexn. The only modifications in the photo were to sand down the inside to remove imperfections and apply some feed-n-wax to the top. NO PAINTING or colors were added. That is the natural filament look. The entire piece shown here used approximately 800g of filament.
This model, when purchased comes with commercial usage rights.
Printing Tips
The photos shown are scaled to 400mm and printed on the Anycubic Kobra 2 with a .8 nozzle and a .2 layer height. Printed in only 14 hours using lightning infill and 2 walls. The amazing wood grain look is owed to Amolen's wood filament https://amzn.to/48NZexn. The only modifications in the photo to the print were to sand down the inside to remove imperfections and apply some feed-n-wax to the top. NO PAINTING or colors were added. That is the natural filament look. The entire piece shown here used approximately 800g of filament.
The filament really makes the difference with this print. I chose https://amzn.to/48NZexn which really makes an amazing wood look. I could not be happier with this filament.
When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.
