PL: Maker Multitool - The Ultimate 3D Printing Nozzle Brush

$0.00

Revolutionize Your 3D Printing Workflow with the Maker Multitool: 4 Years in the Making!

See it in action!

As a 3D printing enthusiast, I'm always looking for ways to streamline my workflow and make the process more efficient. That's why I'm so excited about the Maker Multitool. This amazing tool has been four years in the making, and it's specifically designed for imrpvoing 3D printing workflow.

One of the things I love about the Maker Multitool is that it makes the entire 3D printing process so much easier. Instead of having to switch between different tools, I can do most everything I need with just one device.

I think the Maker Multitool is a game-changer for anyone who's serious about 3D printing. It's made my workflow so much smoother and more efficient, and I love that I can take it with me wherever I go. If you're looking for a tool that will help you take your 3D printing to the next level, I highly recommend checking it out

This model is NC-ND-AI [Read Model License Terms]

Add To Cart

Revolutionize Your 3D Printing Workflow with the Maker Multitool: 4 Years in the Making!

See it in action!

As a 3D printing enthusiast, I'm always looking for ways to streamline my workflow and make the process more efficient. That's why I'm so excited about the Maker Multitool. This amazing tool has been four years in the making, and it's specifically designed for imrpvoing 3D printing workflow.

One of the things I love about the Maker Multitool is that it makes the entire 3D printing process so much easier. Instead of having to switch between different tools, I can do most everything I need with just one device.

I think the Maker Multitool is a game-changer for anyone who's serious about 3D printing. It's made my workflow so much smoother and more efficient, and I love that I can take it with me wherever I go. If you're looking for a tool that will help you take your 3D printing to the next level, I highly recommend checking it out

This model is NC-ND-AI [Read Model License Terms]

Revolutionize Your 3D Printing Workflow with the Maker Multitool: 4 Years in the Making!

See it in action!

As a 3D printing enthusiast, I'm always looking for ways to streamline my workflow and make the process more efficient. That's why I'm so excited about the Maker Multitool. This amazing tool has been four years in the making, and it's specifically designed for imrpvoing 3D printing workflow.

One of the things I love about the Maker Multitool is that it makes the entire 3D printing process so much easier. Instead of having to switch between different tools, I can do most everything I need with just one device.

I think the Maker Multitool is a game-changer for anyone who's serious about 3D printing. It's made my workflow so much smoother and more efficient, and I love that I can take it with me wherever I go. If you're looking for a tool that will help you take your 3D printing to the next level, I highly recommend checking it out

This model is NC-ND-AI [Read Model License Terms]

Printing Tips

Parts Used:

Small layer height. .14 recommended. 3 walls Supports NOT needed. Orient the print so the square holes are facing the bottom and your printer should easily bridge the small distance. Choose walls to print inside to outside as there are steep overhangs on the deburring tool. Maximum cooling Use horizontal expansion if your deburring bit or the drawer is too tight. On a well calibrated printer this wont be a problem. Make sure your flow and wall width is accurate.

Klipper takes about 3 hours for both, where Marlin will take about 6-7 total. Print both parts in the same orientation for the best fit. Minimal infill required.

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or consider supporting my ongoing work https://www.patreon.com/makersmashup Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!

No cost option to support my work?

  • Subscribe to the YT channel

  • Follow me on Thangs.com

  • Watch videos on the channel!

  • Share any of the videos on social media!

  • Share my models with friends and family!

PL: Stacking Filament Swatch System
$0.00
PL: Polar Filament Adapter for Bambu AMS
$0.00
PL: ARRMA Fireteam Dual 30mm Fan Mod.stl
$0.00
PL: Powermod Spool Holder - For Kingroon and other external power supplies
$0.00
PL: Print Bed Leveling Tool - MGN12 Dial Indicator Mount for 3D Printer Tramming
$0.00