CL: Light Up Magic Wands (Uses Balloon Lights)

$10.00

This light up magic wand will be a hit at any party or everyday fun. A fun novelty toy, it prints super fast and lights up with an inexpensive balloon light which will last for days. Save the little insert on the light and they last much longer! Everything is press fit and easy to assemble and disassemble.

Here are some 3D Printing spells these wands know by heart!

  • "Layerus Maximus" - For when you want that print to finish in record time.

  • "Nozzleus Cleanse-o" - Instantly clears any clogged nozzles.

  • "Adherio Beddus" - Ensures first-layer perfection every time.

  • "Filamentus Changus" - Magically swaps out filament spools.

  • "Calibratus Perfecto" - Auto-levels the bed to perfection.

These also work as a "Design Your Own" since you can print parts in multiple colors, and the "crystals" are different colored LED balloon lights. Sell extra lights as an added bonus when you sell these fun toys in your store (with a Thangs Subscription to Makers Mashup). Subscribers to my plans have commercial print rights to these files.

These are very fast to print as well. Designed with minimal plastic in mind, each one of these costs approximately 30 cents to produce including the balloon light.

This model, when purchased comes with commercial usage rights.

Add To Cart

This light up magic wand will be a hit at any party or everyday fun. A fun novelty toy, it prints super fast and lights up with an inexpensive balloon light which will last for days. Save the little insert on the light and they last much longer! Everything is press fit and easy to assemble and disassemble.

Here are some 3D Printing spells these wands know by heart!

  • "Layerus Maximus" - For when you want that print to finish in record time.

  • "Nozzleus Cleanse-o" - Instantly clears any clogged nozzles.

  • "Adherio Beddus" - Ensures first-layer perfection every time.

  • "Filamentus Changus" - Magically swaps out filament spools.

  • "Calibratus Perfecto" - Auto-levels the bed to perfection.

These also work as a "Design Your Own" since you can print parts in multiple colors, and the "crystals" are different colored LED balloon lights. Sell extra lights as an added bonus when you sell these fun toys in your store (with a Thangs Subscription to Makers Mashup). Subscribers to my plans have commercial print rights to these files.

These are very fast to print as well. Designed with minimal plastic in mind, each one of these costs approximately 30 cents to produce including the balloon light.

This model, when purchased comes with commercial usage rights.

This light up magic wand will be a hit at any party or everyday fun. A fun novelty toy, it prints super fast and lights up with an inexpensive balloon light which will last for days. Save the little insert on the light and they last much longer! Everything is press fit and easy to assemble and disassemble.

Here are some 3D Printing spells these wands know by heart!

  • "Layerus Maximus" - For when you want that print to finish in record time.

  • "Nozzleus Cleanse-o" - Instantly clears any clogged nozzles.

  • "Adherio Beddus" - Ensures first-layer perfection every time.

  • "Filamentus Changus" - Magically swaps out filament spools.

  • "Calibratus Perfecto" - Auto-levels the bed to perfection.

These also work as a "Design Your Own" since you can print parts in multiple colors, and the "crystals" are different colored LED balloon lights. Sell extra lights as an added bonus when you sell these fun toys in your store (with a Thangs Subscription to Makers Mashup). Subscribers to my plans have commercial print rights to these files.

These are very fast to print as well. Designed with minimal plastic in mind, each one of these costs approximately 30 cents to produce including the balloon light.

This model, when purchased comes with commercial usage rights.

Printing Tips

Brims are super helpful on these.

Use a thick draft mode .28 layer height to quickly print these.

You will need some inexpensive Balloon lights in order to light up the toy. The Balloon lights I used were https://amzn.to/40dhj4h and I used a multicolor pack but they also sell these from a number of different vendors and in different colors. Referral links help support my free model development.

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.  

PL: Indoor Campfire
$0.00
CL: Indoor Campfire
$10.00
PL: Topper Lamp - Executive Lunar Collection
$5.00
CL: Topper Lamp - Executive Lunar Collection
$10.00
CL: "Turbo" - Full Size Table Lamp - Large Format Print
$10.00