PL: Geometric Lamp & Shade
Geometric Lamp with Shade. This Lamp prints with supports on the base. You need only minimal supports for the top. Print slowly with a lot of cooling for the best look.
This model, when purchased comes with personal usage rights.
Geometric Lamp with Shade. This Lamp prints with supports on the base. You need only minimal supports for the top. Print slowly with a lot of cooling for the best look.
This model, when purchased comes with personal usage rights.
Geometric Lamp with Shade. This Lamp prints with supports on the base. You need only minimal supports for the top. Print slowly with a lot of cooling for the best look.
This model, when purchased comes with personal usage rights.
Printing Tips
.16 Layer height gives a really nice look to the outside. Large heights will just disappoint you. Go slow. Fast speeds just give you bad corners.
To get the multicolored shade effect I use, simply swap filament 8mm in and 8mm before the end. With the Bambu this is easy but 3 filament swaps will work with any FDM printer. Just change filament appropriately.
You will need a traditional "Lamp Kit" to complete the project with a harp. Something like https://amzn.to/3ZCfde0 works well. You'll need approximately 180mm of tube length and the cover can be adjusted by adjusting its Z-Height but the default 165 looks the Best IMHO. Use washers and nuts to hold the rods to the base.
When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.
