PL: Filament Rack - Wall Mounted
Print multiple copies of this filament rack and then use a wooden dowel on the front and back to support the filament. PVC may also be used. If you encounter bowing in the dowel or PVC just print another mount and place it in the middle.
This model is NC-ND-AI [Read Model License Terms]
Print multiple copies of this filament rack and then use a wooden dowel on the front and back to support the filament. PVC may also be used. If you encounter bowing in the dowel or PVC just print another mount and place it in the middle.
This model is NC-ND-AI [Read Model License Terms]
Print multiple copies of this filament rack and then use a wooden dowel on the front and back to support the filament. PVC may also be used. If you encounter bowing in the dowel or PVC just print another mount and place it in the middle.
This model is NC-ND-AI [Read Model License Terms]
Printing Tips
Print with 25% infill and 3 walls.
When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.
Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!
Consider dropping a tip https://koji.to/k/8E9J or consider supporting my ongoing work https://www.patreon.com/makersmashup Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!
No cost option to support my work?
Subscribe to the YT channel
Follow me on Thangs.com
Watch videos on the channel!
Share any of the videos on social media!
Share my models with friends and family!
