PL: DIY Fume Extractor

$0.00

This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together. The prints should take about 3 hours total to print everything and then you can assemble it. The assembly video is here https://youtu.be/IyjuDWjKk_U

This model is NC-ND-AI [Read Model License Terms]

Add To Cart

This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together. The prints should take about 3 hours total to print everything and then you can assemble it. The assembly video is here https://youtu.be/IyjuDWjKk_U

This model is NC-ND-AI [Read Model License Terms]

This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together. The prints should take about 3 hours total to print everything and then you can assemble it. The assembly video is here https://youtu.be/IyjuDWjKk_U

This model is NC-ND-AI [Read Model License Terms]

Printing Tips

You need 4, 40mm or 45mm M3 Screws depending how you assemble it.

120mm Case Fan https://www.amazon.com/APEVIA-CF12SL-UBL-120mm-Molex-Motherboard/dp/B001NGMRAG/ref=as_li_ss_tl?keywords=120mm+case+fan&qid=1578093334&refinements=p_85:2470955011&rnid=2470954011&rps=1&sr=8-31&linkCode=sl1&tag=rwmech-20&linkId=c5df3babd3851ad90a3d22870010761c&language=en_US

USB Boost Module https://www.amazon.com/APEVIA-CF12SL-UBL-120mm-Molex-Motherboard/dp/B001NGMRAG/ref=as_li_ss_tl?keywords=120mm+case+fan&qid=1578093334&refinements=p_85:2470955011&rnid=2470954011&rps=1&sr=8-31&linkCode=sl1&tag=rwmech-20&linkId=c5df3babd3851ad90a3d22870010761c&language=en_US

Carbon Filter https://www.amazon.com/APEVIA-CF12SL-UBL-120mm-Molex-Motherboard/dp/B001NGMRAG/ref=as_li_ss_tl?keywords=120mm+case+fan&qid=1578093334&refinements=p_85:2470955011&rnid=2470954011&rps=1&sr=8-31&linkCode=sl1&tag=rwmech-20&linkId=c5df3babd3851ad90a3d22870010761c&language=en_US

Follow us on YouTube at https://youtube.com/MakersMashup

Please consider helping support the channel through Patreon https://www.patreon.com/makersmashup

Follow me on Twitter: https://twitter.com/MakersMashup Instagram: https://instagram.com/makers_mashup/ Visit our website www.MakersMashup.com

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or consider supporting my ongoing work https://www.patreon.com/makersmashup Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!

No cost option to support my work?

  • Subscribe to the YT channel

  • Follow me on Thangs.com

  • Watch videos on the channel!

  • Share any of the videos on social media!

  • Share my models with friends and family!

PL: V for Verified Security Key Keyfob
$0.00
CL: Vault Key Fob - Blank
$5.00
PL: Vault Key Fob - Blank
$5.00
CL: Blank Retro Keyfob for Resellers
$5.00
PL: Blank Retro Keyfob for Resellers
$5.00